How to Fix Speaker Not Working on Your Phone

How to Fix Speaker Not Working on Your Phone

Last Updated on

If your phone speaker isn’t responding and you’ve been looking for where to get a quick fix, well you just landed on the right page. We know how frustrating it gets when you making a call and both parties can’t hear each other or one of both can’t hear the other. However, for every problem, there must be a solution. and that is why we’re here to show you how to fix speaker not working problem on your phone.

On this post, we’ve made available for you a few on-point techniques you can use to fix the speaker not working on your phone. simply follow and apply these instructions and we guarantee that your phone will be back to its normal working condition.

Irrespective of the phone you use (Android or iPhone) these tips are useful for both platforms.

How to Fix Speaker Is Not Working on Your Android Device

Follow these steps to uncover the cause of the problem:

Switch on the speaker

Speaker Not Working

In the event that you can’t hear anybody on the opposite end during a call, verify whether the speaker is empowered. On the off chance that it is initiated, the speaker symbol is green or featured. On the shot that it’s not, tap the speaker symbol so it lights up to empower it.

Turn up the in-call volume

Speaker Not Working

On the off chance that the speaker is empowered, the volume might be turned down excessively low. Press the volume up button on your telephone. This will, in general, be on the left half of most telephones. Press this button to show the volume level marker. To expand the volume, press the button or slide the volume marker to one side until you hear the other individual talking.

The best way to test and set the in-call volume is to be in a call. Make a test call to your voice message to try different things with the in-call settings.

Adjust the app sound settings

Some applications, for example, Facebook and Instagram enable you to quiet the sound independently from the primary volume control. On the off chance that you don’t hear sound in one specific application, check the application’s sound settings. You may have the sound quieted or turned down low in the application.

Check the media volume.

If you still don’t hear anything, verify that the media volume isn’t turned down or off:

  • Navigate to Settings.
  • Tap Sounds and vibration.
  • Tap Volume.
  • Move the Media

You can also press the volume up or volume down buttons on your device, then tap the down arrow in the upper-right corner of the screen to reveal the sound mixer settings.

Make sure ‘Do not disturb’ isn’t enabled

This convenient component could be the guilty party for no sound. To stop this setting, explore to Settings and shut down the Do not disturb toggle.

Android 6.0 (Marshmallow) shows the accompanying options: Total silence, Alarms only, and Priority as it were.

Make sure your headphones aren’t plugged in

Most Android telephones consequently debilitate the outer speaker when headphones are connected. This could likewise be the situation if your earphones aren’t totally situated in the sound jack.

Remove your phone from its pouch

Some telephone holsters or cases may stifle the sound. Expel your Android telephone from its case, at that point test the sound. You’ll see promptly if the sound improves.

Reboot your device

Speaker Not Working

A reboot regularly clears up any product glitches that may cripple the sound. Press and hold the power catch until you see a lot of choices on the screen. Tap Restart to reboot your telephone.

Switch off your device and turn it back on

In the event that rebooting doesn’t work, your telephone may have some specialized issue that expects you to turn it off and on again. In that case, press and hold the power catch, and afterward, tap Power off. When you control your telephone back on, test the sound with an application.

Remove and Reinsert the battery

Not all telephone models have removable batteries, yet on the off chance that yours does, evacuate and reinsert the battery to totally reset the telephone without cleaning your information. Check the cellphone maker’s manual or site for more info.

Clean the speaker

Speakers get messy or stopped up with dust, so a touch of cleaning could make sounds obvious once more. Before you clean the speaker, turn off the telephone and evacuate the battery. Utilize a container of compacted air to blow brisk blasts into the speaker. You’ll see some build-up and different trash subsequent to blowing it out. You might almost certainly blow through the speaker without opening the case.

Check with your telephone’s manual or a cell phone seller for assistance with this procedure. Try not to endeavor to clean the speaker on the off chance that you aren’t acquainted with cell phone equipment, or if your gadget is under warranty.

Reset all settings

Before you return your telephone to the store, reset the telephone to its default state. When you reset your telephone’s settings to the default, any application or programming setting that may have handicapped the speaker is disposed of. After that check to see if the speakers are now working.

Steps to reset your phone:

  • Navigate to Settings.
  • Tap General Management.
  • Click Reset Settings.
  • Select Reset Settings again.

Check your device’s manual

After all set and done, if the above tips don’t work out for you, check your device’s manual or the manufacturer’s website for more specific guidance or consult a professional technician.

This is a simple trick to test the loudspeaker on an Android smartphone to see if it’s functioning properly.
  • Type in *#7353# into the dialer as though you are dialing a phone number.
  • You will be presented with a list of options.
  • Don’t get startled and drop your phone on accident!
  • Once you tap on Speaker, music should start to play.

How to fix iPhone or iPad water damage

  • Take your phone out of the water as quickly as possible
  • Turn it off.
  • Take the case off if you have one.
  • Remove the SIM card.
  • Shake it very well and then,
  • Wipe your phone down with the most absorbent cloth you can find, and make sure it’s a dry one.
  • before turning it back on, make sure it’s dry. You can as well put the phone inside a bowl or bag of raw rice so the water can be completely absolved.
Your phone speakers just like microphone holes can collect dust, lint, and all sorts of undesirable stuff. The best way to clean these is with a super soft bristle toothbrush. Gently brush the speaker ports and the phone microphones opening to remove any debris that has accumulated.
To troubleshoot your Bluetooth speaker, on your iOS device, go to Settings > Bluetooth and make sure that Bluetooth is on. If you can’t turn on Bluetooth or you see a spinning gear, restart your iPhone, iPad, or iPod touch. Then try to pair and connect it again.  Make sure that your Bluetooth accessory is on and fully charged or connected to a power source. This same process can be followed when troubleshooting your Bluetooth speaker connected to your Android devices